Sunday 10 February 2013

1.5W Headlamp

A few days ago, I discovered one of my old torches' batteries had leaked and as the battery died, couldn't be replaced. This was actually rather good news. I removed the head from the torch along with the LED and it's mounting plate then re-soldered the connecting wires so that they were much longer than the original 2cm wires. After a test with some BC547B transistors, a 27kΩ resistor and the Raspberry Pi, the LED is really bright at 5V. So this became the main headlamp for TankPi and was mounted on the front.



Jamie
Posted by at

No comments:

Post a Comment

Thanks for your comment! If it's a query or question, I'll try to get back to you as soon as I can. I hope this blog has helped or inspired you!

Subscribe to: Post Comments (Atom)